U-Type Constant Springs Custom Designed for Large Travel for an Oil Refinery

September 19, 2011

U-Type Constant Springs Custom Designed for Large Travel for an Oil Refinery

These figure 200 U-type constant springs were fabricated from A-36 carbon steel and range in size from 30-1/2″ to 41″ in height, 25″ to 31″ in width, and 68″ to 80″ in length. These are horizontal constants designed to support piping from below where the base plate is bolted directly to the top of the steel or the foundation using anchor bolts. Loads range from 9,000 lb. to 42,000 lb., and vertical movements range from 6″ to 11″. All the constants went through standard load and travel testing per MSS Standards prior to shipment.

U-Type Constant Springs Custom Designed for Large Travel for an Oil Refinery

Want to learn more about constant springs? Instantly view a recording of a past webinar.

access-our-webinar-archives

Read More

F-type Variable Spring Support with a Stainless Steel Wire Rope Isolator

September 6, 2011

F-type Variable Spring Support with a Stainless Steel Wire Rope Isolator

This F-type variable spring support was customized with a wire rope isolator for a facility located in Canada. The variable spring was designed for a load of 12,000 lb. The wire rope isolator is essentially a 1.25″ diameter stainless steel rope looped eight times between two chemically conversion coated aluminum alloy retaining bars. The wire rope isolator is effective in vibration isolation and energy absorption.

Need a similar support? We’d be happy to serve your needs!


Read More
Top