Structural Supports Custom Designed for a Liquefaction Project

May 22, 2017

Structural Supports Custom Designed for a Liquefaction Project

Type: Structural Supports
Size: 6″ x 12″ to 6″ x 18″
Material: Carbon Steel with HDG Finish
Testing: Standard Q.C. Inspection

Piping Technology & Products custom designed these structural supports to provide base support for pipes at a liquid natural gas (LNG) facility in Louisiana. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. Sizes range from 6″ x 12″ to 6″ x 18″ and all supports underwent a quality control inspection prior to shipment.

Read More

Mechanical Snubbers for a Refinery in Oklahoma

May 5, 2017

Mechanical Snubbers for a Refinery in Oklahoma

Type: Mechanical Snubbers
Size: Size MSA-10, 36″ OAL, and 30 1/2″ Pin-To-Pin
Material: Carbon Steel with HDG Finish
Design: Operating load of 15,000 lbs and a 6″ Maximum Stroke
Testing: Standard Load Tests

Piping Technology & Products supplied these mechanical snubbers with two end brackets, fabricated from carbon steel with an HDG finish for a refinery in Oklahoma. They are size MSA-10, 36″ OAL, and 30 1/2″ pin-to-pin. The snubbers are designed for an operating load of 15,000 lbs and have a 6″ maximum stroke. Standard load tests were performed prior to shipment. Mechanical snubbers have two modes of operation. In passive mode, i.e., motion caused by thermal loads, the resisting mechanism is disengaged and the snubber “free wheels” with very low resistance. In active mode the mechanism is engaged, and the snubber limits the acceleration to a low threshold value.

Read More
Top