Over 8,000 Instrument Stands Designed for an LNG Facility

December 22, 2014

Instrument Stands Designed To Mount Instrument Panels In An Lng Facility

PT&P manufactured custom instrument stands designed to mount instrument panels in an LNG facility located in Australia. We are supplying 8,000 assemblies fabricated from carbon steel with a hot-dipped galvanized finish. The average size measures 68″ in length, 22″ in width and 82″ in height. Total weight to be shipped is over 800,000 pounds. All assemblies underwent quality control inspection prior to shipment.

Read More

Hydraulic Snubber Designed for a Gas Turbine in a Natural Gas-Fired Combined Cycle Generating Power Plant

December 14, 2014

Hydraulic Snubber Designed For A Gas Turbine In A Natural Gas-Fired Combined Cycle Generating Power Plant

Fronek Anchor/Darling Enterprises Inc., a division of PT&P designed and fabricated this hydraulic snubber assembly for a gas turbine in a natural gas-fired combined cycle generating power plant in Pennsylvania. This fig -510AD is designed for a 10,000 lb. load and a 6″ stroke. It measures 28-1/2″ pin-to-pin and has a 2-1/2″ diameter cylinder. It is designed for an operating temperature of 1052°F and a movement of 4-1/8″. This snubber was tested using the STADAS test machine prior to shipping.

Read More

PTFE Slide Plates Designed for an Oil Refinery in Texas

December 1, 2014


Ptfe Slide Plates Designed For An Oil Refinery In Texas

PT&P custom designed PTFE slide plates for an oil refinery in Texas. These slide plate assemblies are comprised of 3/32″ thick 25% glass filled (PTFE) slide plates bonded to hot dipped galvanized carbon steel backing plates. The assemblies measure 47-1/2″ long by 36-1/2″ wide and 45″ long by 16″ wide. PTFE material provides a low coefficient of friction, is easy to install, does not require surface treatments, or grouting, and is unaffected by weather conditions.

Read More
Top