PT&P designed and fabricated F-type and C-type variable spring supports for an acid plant in Canada. The variables range from 4″-8″ in diameter and can accommodate between .039″– 5.02″ in movement. They are designed for an operating temperature of 200°F and operating loads between 509 lb. and 13,489 lb. The variable springs are coated with a red oxide coating to protect against corrosion and underwent standard and load travel tests prior to shipment.
Sign-up for a Live Technical Webinar…
Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment, or replacement. View in field examples, shutdown, and isolation procedures. See the selection process required when there are significant changes to the operating condition.
April 25th: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
May 2nd: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
May 9th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
