Constant Spring Support Assemblies Designed for a Chemical Plant in New Jersey

January 23, 2017

Constant Spring Support Assemblies Designed for a Chemical Plant in New Jersey

Type: Constant Spring Supports
Size: PTP 200 C-Type Double Suspension
Material: Hot-dipped Galvanized Carbon Steel | Epoxy Coated Springs
Load: 8,000 lb. – 19,000 lb. | Upward Movement: 6″ – 9″
Testing: Standard Load and Travel Test

PT&P designed twelve constant spring support assemblies for a chemical plant in New Jersey. The assemblies will be used as replacements in a recuperator up-leg and down-leg application in conjunction with custom cross-over supports previously fabricated by PT&P. Physical sizes of these constant assemblies range from 18-1/2″ x 22″ x 64″ to 18-1/2″ x 26″ x 83″. Operating loads range between 8,000 lb. – 19,000 lb. and each allows for upward movement between 6″ – 9″. The spring coils are coated with epoxy instead of the standard neoprene coating. Standard load and travel tests were completed prior to shipment.

Top