These variable spring hangers were designed for a 10″ pipe line in a solar electric generating system. All assemblies were fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The picture on the left shows a structural steel assembly supporting a PTP-1 variable spring and a Fig.80 heavy 3-bolt clamp designed for a 3,789 lb. load. The picture on the right shows two PTP-2 variable spring hangers welded to a structural steel beam designed for a 675 lb. load. Each pipe hanger assembly went through standard load and travel testing prior to shipping.
![Webinar General](https://pipingtech.com/wp-content/uploads/2018/12/webinar-general-300x153.jpg)
Live New Webinar
Sign-up for a Live Technical Webinar…
Engineered Spring Supports (Practical, Hands-on Approach) Webinar
Date: Thursday, July 18, 2024 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment, or replacement. View in field examples, shutdown, and isolation procedures. See the selection process required when there are significant changes to the operating condition.
Upcoming Webinars:
July 25th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
August 1st: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
August 8th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am OR 2:00 pm
![Piping Design Course 300Width](https://pipingtech.com/wp-content/uploads/2018/05/piping-design-course-300width-e1527629373971-300x167.jpg)
Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits