These variable spring hangers were designed for a 10″ pipe line in a solar electric generating system. All assemblies were fabricated from A-36 carbon steel with a hot-dipped galvanize finish. The picture on the left shows a structural steel assembly supporting a PTP-1 variable spring and a Fig.80 heavy 3-bolt clamp designed for a 3,789 lb. load. The picture on the right shows two PTP-2 variable spring hangers welded to a structural steel beam designed for a 675 lb. load. Each pipe hanger assembly went through standard load and travel testing prior to shipping.

Live New Webinar
Sign-up for a Live Technical Webinar…
Field Service: Problem Resolution Live Webinar
Date: Thursday, December 21, 2023 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
In this presentation, we explore the details of actual case studies focusing on various signs that indicate if a particular support needs replaced or adjusted. The presentation also covers projects that brought on new standard designs and custom designs for specific applications. And lastly, it includes valuable additions and procedures that extend the typical lifespan of a pipe support. PT&P’s field service division is available 24×7 in the case of an emergency situation or for a scheduled shutdown.
Upcoming Webinars:
December 14th: U.S. Bellows 101 - The Basics of Expansion Joints 10:00 am OR 2:00 pm

Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits