Compact Spring Supports Designed for an Oil Refinery in Minnesota

April 4, 2023

Compact Spring Supports Designed For An Oil Refinery In Minnesota

These compact spring supports were custom designed for an oil refinery in Minnesota. Typically, compact spring supports are used to support large loads but small movements relieving process equipment nozzles from overloading. In this case, the springs are designed to support loads of 5,605 lb., 4,747 lb. and 1,250 lb. and movements of 0.133” and 0.029” upward and 0.199″ downward, respectfully.

Compact spring supports utilize engineered Belleville (disc spring) washers. Since these spring supports contain disc springs, both the support housings and the springs contained in the housings are made from 304 stainless steel. Corrosion resistance is significantly increased by using this combination. Glass coatings can also be applied to both the housing and springs to make the support system virtually impervious. Each assembly underwent load testing prior to shipment.