F-Type Constant Spring Supports Designed and Manufactured for Gas Plant

April 20, 2020

F-Type Constant Spring Supports Designed and Manufactured for Gas Plant

Type: F-Type Constant Spring Supports
Size: 36″- 87″ Length | 24″ Height
Material: A36 Carbon Steel | HDG | SS Slide Plates
Design: 13,500 lb. Load | 250°F | 17.5″ Travel
Testing: Q.C. Inspection | Load and Travel Tests

PT&P custom-designed multiple horizontal F-Type constant spring supports for a gas plant in Saudi, Arabia. The constants are provided with stainless steel slide plates and custom-designed for 17.5” total travel. They are fabricated from carbon steel, hot-dipped galvanized and painted to withstand a highly corrosive environment. The assemblies are 24” in height, 36” – 87” in length, designed for an operating temperature of 250°F and loads up to 13,500 lb. Load tests and dye penetrant testing was conducted prior to shipment.

Read More

B-Type Variable Spring Hangers for an LNG Facility in Texas

April 7, 2020

B-Type Variable Spring Hangers for an LNG Facility in Texas

Type: B-Type Variable Spring Support Assemblies
Size: 100-B-Type & 200-B-Type | 13″ to 120″ Pipe Elevation
Design: Operating Loads: 9,320 lb. to 28,2000 lb.
Spring Rates 4,700 lb./in. & 5,320 lb./in
Material: | Hot-dipped Galvanized Carbon Steel
Testing: Load & Travel Test |  Q.C. Inspection

PT&P designed B-type variable spring hanger assemblies for an LNG facility in Texas. They are supplied to support piping ranging in elevation of 13” to 120” and are designed for operating loads from 9,320 lb. to 28,2000 lb. The spring rates range from 4,700 lb./in. for the Short Spring up to 5,320 lb./in. for the Standard Spring. They are furnished with a clevis and one lug that will be welded to the supported pipe or trunnion and are fabricated from carbon steel with a hot-dipped galvanized finish. Standard load and travel tests were completed prior to shipment.

Read More
Top