Custom Manifolds Designed for a Polyethylene Facility

October 29, 2019

 

Custom Manifolds With Globe And Gate Valves Designed For A Polyethylene Facility

Type: Custom Manifolds with Globe and Gate Valves
Size: 72” Height | 1″ x 1-1/2″ | 1″ x 2”
Material: SA-105 | SA-106B | SA-36
Testing: 100% Dimensional | Inspection Q.C. Inspection
NDE(RT,PT) Hardness | Hydro-test @ 430 PSIG

PT&P supplied 41 custom manifolds with globe and gate valves to a manufacturing complex in La Porte, Texas. The manifolds were installed in a hot water tracing supply and return system at a high-density polyethylene (HDPE) facility. Each manifold was welded to the exact specifications listed on the production drawing developed. The body was fabricated from 2” and 1” seamless XS pipe. The ports were FNPT and flange connection for field installation. All Manifolds were supplied with welded brackets and vertical support stands. The material used for the valves and flanges were SA-105, pipe SA -106B, and the supports are manufactured from SA-36. The overall height is 72″, and the dimensions are 1″ branches x 1-1/2″ run line and 1″ branches x 2″ run line. Inspection and Q.C. tests were performed by an internal and TPI team including 100 % dimensional inspection, NDE(RT,PT), hardness, and hydro-test at 430 PSIG.

Top