PT&P’s Sweco Fab division designed and manufactured a pig launcher and receiver with a flag type indicator and a flanged HI-T Pig Alert pig signaler. They are fabricated from carbon steel with a three coat paint system. The pig launcher has an 8” diameter minor barrel, a 10” diameter major barrel, and is 110” in overall length. The pig receiver has a 10” major barrel, a GD II Closure and is 170” in overall length. They are designed for 430 psig at 100°F and were hydro-tested at 645 psig , held for four hours. Both pig launcher and receiver went through a 100% radiography test prior to shipment.
Live New Webinar
Sign-up for a Live Technical Webinar…
Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar
Date: Thursday, April 22, 2021 – Register for 10:00 am or 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits