Variable Spring Supports for a Furnace application at an Ammonia Plant

August 7, 2017

Variable Spring Supports for a Furnace application at an Ammonia Plant

Type: Variable Spring Supports
Material: Carbon Steel | Red-Oxide Primer | 304 SS
Design: 3,000 lb./in.
Testing: Load Test

PT&P custom designed variable spring support assemblies for a furnace application at an ammonia plant. The furnace springs are fabricated from carbon steel and painted with a red-oxide primer to help prevent corrosion. The pipe clamps are fabricated from 304 stainless steel. They are designed to support a cold load of almost 3,000 lb./in. while operating in an area where temperatures are higher than ambient. There were a total of 173 assemblies fabricated for this project, 152 variable hangers, 3 constant spring supports, 6 ball joint rigid struts, and 12 rigid rod hangers. Special load tests were performed prior to shipping.

Top