PT&P manufactured these F-type variable spring supports for a facility in Canada. The springs are fabricated from A36 carbon steel with a hot-dipped galvanized finish. The variables installed heights range from 11″ to 15″ and are designed for operating conditions up to 4,000 lb. Bronzphite® is best suited for high loads, low velocity applications and where the use of oil or grease is undesirable or unfeasible. The bronze plate acts as the bearing surface, withstanding heavy loads, while the graphite inserts provide a solid, oil-free lubricant. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.
Live New Webinar
Sign-up for a Live Technical Webinar…
Pipe Support Engineering & Design Webinar
Date: Thursday, April 25, 2024 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress, and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick turnaround time when you need it most.
Upcoming Webinars:
May 2nd: Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar 10:00 am OR 2:00 pm
May 9th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am OR 2:00 pm
May 16th: Pipe Support Field Inspection, Installation and Maintenance Webinar 10:00 am OR 2:00 pm
Online Course
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits