PT&P designed C-Type variable spring support assemblies for a power plant in Louisiana. They are designed for operating loads ranging from 1,319 to 2,800 lb. with an upwards travel ranging from 0.11″ to 0.34″. The variables were fabricated from carbon steel with a hot-dipped galvanized finish and standard load and travel testing was completed prior to shipment
Sign-up for a Live Technical Webinar…
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
February 9th: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am
February 16th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
February 23rd: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
