PT&P designed and fabricated 112 variable spring supports for a furnace application at an oil refinery in California. The spring cans are fabricated from carbon steel, vary from 36″ to 54″ in height and designed to operate at 400°F. The furnace cans are designed for operating loads ranging from 180 lb. to 1,400 lb. and movements from 1″ to 5″. The customer specified a custom paint system of two part iron oxide blue finish for the cans to comply with refinery conditions. Load tests were performed on the assemblies prior to shipment to determine the operating load and variability.
Live New Webinar
Sign-up for a Live Technical Webinar…
Variable Spring Support Design, Size Selection, Installation & Maintenance Webinar
Date: Thursday, March 30, 2023 - Register for 10:00 am OR 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
No upcoming webinars. Please check later.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits