Piping Technology & Products, Inc. custom fabricated sixty bolt cradle supports in May 2006. The base was fabricated by welding two plates to form a “T.” This was used in place of a standard split “T.” By making simple modifications to a standard Figure 900 for two-inch pipe, such as heavier clamps and shortened base length, PT&P was able to meet the customer’s special requirements quickly and efficiently.
Do you require cradle supports for your current or future job? Get pricing today!
200-U Type Constant-Custom Design
– Designed for 21,269 lb. load
– 26-1/4″ W x 80″ L x 28-1/2″ H
– 10″ upward travel
– 12″ total travel
200-U Type Constant
– Designed for 18,273 lb. load
– 26-3/8″ W x 66″ L x 23-1/4″ H
– 0.43″ downward & 1.22″ upward travel
– 3″ total travel
100-G Type Constant
– Load range: 15,226 lb. to 17,210 lb
– 13″ W x 87″ L x 59″ H
– 2.8″ downward travel
– 4″ total travel
200-U Type Constant-Custom Design
– Load Range: 14,060 lb. to 18,334 lb.
– 27″ W x 84″ L x 24-5/8″ H
– Actual Travel Range: 10″ to 11″ Upward
– Total Travel Range: 12-1/2″ to 13-1/2″
Do you see a need for constant spring supports in your plant? Get pricing today!
