Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia

February 7, 2017

Big Ton Spring Supports Designed for a Liquid Natural Gas Facility in Australia

Type: Big Ton Spring Supports
Size: 19-5/8″ x 19-5/8″ x 15″
Material: Hot-dipped Galvanized Carbon Steel | A193 Gr. B7
Design: Movements: 3/16 ” – 1/4″ | 16,619 lb. Load
Testing: Load Cell throughout Operating Range

These big ton spring supports were designed for a liquid natural gas (LNG) plant in Australia. They were selected because the application required supporting heavy loads as the supported equipment undergoes thermal expansion during operation. The assemblies are fabricated from hot-dipped galvanized carbon steel. The travel stop rods and nuts material is A193 Gr. B7. The units measure 19-5/8″ x 19-5/8″ x 15″ and are capable of supporting loads up to 13,619 lb. while accommodating movements from 3/16″ to 1/4″. The big tons were tested with a load cell to insure proper operation throughout the big ton’s operating range.

Top