PT&P fabricated constant support assemblies for a power plant in New Mexico. The constant assemblies will be used in conjunction with structural supports also provided by PT&P. Operating loads range between 7,000 lb. and 20,000 lb. and designed for movements from 10-1/2″ to 12″. All thread rods were coated with rust prevention compound and the constants were painted with Intergard® 475 HSS. The travel stops are wired to the constants frame and can be reused to lock the constant, preventing travel during plant maintenance or shutdowns. Standard load and travel tests were completed according to MSS standards prior to shipment.
Live New Webinar
Sign-up for a Live Technical Webinar…
Constant Spring Supports Design and Application Webinar
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of constant spring supports. Learn about the special features available, in addition to the design of a constant support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace a constant spring support, as well as shutdown and isolation procedures.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits