The slide plate assemblies were fabricated from a combination of stainless steel for the low-friction sliding surface and 2-3/4″ Marinite® insulation to isolate the higher temperatures. A fabric reinforced isolator pad was placed between the slide plate and the I-beam for vibration control. The slide plates were tested for both load and heat transfer and will be utilized in a chemical plant.
Live New Webinar
Sign-up for a Live Technical Webinar…
Constant Spring Supports Design and Application Webinar
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of constant spring supports. Learn about the unique features available, in addition to the design of continuous support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step-by-step process used to size spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace constant spring support and shutdown and isolation procedures.
June 9th: Fabric Expansion Joints Webinar by U.S. Bellows, Inc. 10:00 am
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits