PT&P designs thirty F-type variables spring supports for a petroleum facility in Canada. The springs are fabricated from carbon steel and with a hot-dipped galvanized finish. The assemblies are internally guided and have a 3,455 lb. operating load. A standard travel test was conducted on the variables prior to shipment.
Sign-up for a Live Technical Webinar…
Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment, or replacement. View in field examples, shutdown, and isolation procedures. See the selection process required when there are significant changes to the operating condition.
December 26th: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
