Pre-Insulated pipe supports were designed for high-temperature service at an oil refinery for a client that specializes in the engineering and design of fired heaters, furnaces, pre-heaters, and heat recovery systems. These high-temperature pipe supports were fabricated from carbon steel and designed for pipe sizes ranging in 36” – 42” diameter and are not only used for new construction but also upgrades and revamps. The “hot shoes” were designed with the addition of “Spring Washers” (not shown here) to maintain consistent clamping force when the pipe expands and contracts. The insulation is 3″ thick and comprised of High-density Calcium Silicate (asbestos-free) structural inserts treated with water repellant. Standard quality tests were performed before shipment. Our hot shoes are used extensively in Refineries, Styrene Plants, Hydrogen Plants, LNG Facilities, Semiconductor Fabrication Facilities, and General Building Construction.
Live New Webinar
Sign-up for a Live Technical Webinar…
Engineered Spring Supports (Practical, Hands-on Approach) Webinar
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment, or replacement. View in field examples, shutdown, and isolation procedures. See the selection process required when there are significant changes to the operating condition.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits