These big ton spring supports were custom designed for an LNG plant in Australia. These units were designed with PTFE, 25% glass filled slide plates, and will be used under the saddle supports of a horizontal pressure vessel. The big tons were selected due to a combination of confined space, heavy loads, and thermal expansion. The units measure 28-3/8″ x 25-3/8″ x 13” and are capable of supporting a load up to 11,488 lb while accommodating a down travel of 0.31 inches.
Live New Webinar
Pipe Shields for Beginners: Insulated Pipe Supports… for Commercial Applications
This webinar will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides, and anchors that it developed and patented over its 40-year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems, and low-pressure steam lines), installation and maintenance procedures, and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This webinar will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!
Register for June 11, 2020 – Thur. – 10 am & 2 pm CDT
*Live Webinars are worth 1 P.E. / PDH Credit for TX Professional EngineersSign Up Now
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits