PT&P custom designed pipe hanger and clamp assemblies for a flue-gas desulfurization application in an energy facility located in Kansas. The assemblies are designed for pipes ranging in size from 2-1/2″ to 6″ in diameter, and are capable of a 650 lb. operating load. Materials include tube steel, fig. 92 washer, fig. 122 all threaded rod, fig. 30 turnbuckle, fig. 40 weldless eyenut and fig. 70 pipe clamp.
Sign-up for a Live Technical Webinar…
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
February 9th: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am
February 16th: Constant Spring Supports Design and Application Webinar 10:00 am OR 2:00 pm
February 23rd: Pipe Support Engineering & Design Webinar 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
