These pipe rollers were designed for pipelines in an environmental remediation project. These rollers can also be used in conjunction with piping on bridges, landfill gas equipment, including oil-water & moisture separators, SVE systems, candlestick flares, blower packages, drainage systems, and many other infrastructure projects. The rollers are fabricated from cast iron, with a carbon steel frame, rods, and nuts. The units are designed for 14″, 18″, and 24″ pipe sizes and 5,000 to 7,200 lb. operating load. The rollers are designed to include 1-1/2″ thick insulation, and the size is selected to include the pipe covering saddle for the insulation. Standard quality control tests were performed prior to shipment. Roller hangers are used for the suspension of pipe from a single rod where axial movement may occur because of expansion or contraction.
Live New Webinar
Sign-up for a Live Technical Webinar…
Field Service: Problem Resolution Live Webinar
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
In this presentation, we explore the details of actual case studies focusing on various signs that indicate if a particular support needs replaced or adjusted. The presentation also covers projects that brought on new standard designs and custom designs for specific applications. And lastly, it includes valuable additions and procedures that extend the typical lifespan of a pipe support. PT&P’s field service division is available 24×7 in the case of an emergency situation or for a scheduled shutdown.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits