Within a two-week span, PT&P designed and fabricated eight Stainless Steel, grade-304, types B & E Constants for a marine plant. These constants have a travel of 1 1/2 – 5″ and are specified to carry 50 – 1540 lbs load. Stainless steel was requested due to the corrosive nature of the environment. PT&P also manufactured nine Carbon Steel types B & E Constants for this project.
Do you require constants in your current or future project? Let us price them for you today!
Piping Technology & Products, Inc. recently designed and manufactured twenty 28″ dia. Hotshoes (high temperature pre-insulated pipe supports) for a natural gas plant in Massachusetts. These supports are assembled with a 5″ thick high-density Calcium silicate insulation layer, in addition to stainless steel, Kaowool, and PTFE, 25% glass filled, slide plate materials. The supports are designed to support loads from 25 kips-50 kips at an operating temperature of 1800 degrees F. The shoes also allow for a travel of 7″ where applicable. PT&P also designed and fabricated rod hangers with variable spring supports for this project.
Do you have a need for hot shoes in your plant or refinery? Get pricing today!
Sweco Fab, Inc. recently manufactured Spectacle Blinds ranging in size from 28" to 30" for a petroleum plant in Texas. These Spectacle (Figure 8 Blinds) are rated for 300# service, and are fabricated from SA516 carbon steel, grade 70N.
Do you have a need for spectacle blinds in your plant or refinery? Get pricing today!
