PT&P designed and manufactured two hundred and thirty HD-2 hold down clamps to fit 6” to 8” pipes at a chemical refinery. These hold down clamps are used on pipe lines where there is a high temperature and great thermal movement requirements, they allow axial movement and restrain lateral movement at the same time. The clamps are fabricated from carbon steel with 3/32” PTFE, 25% glass filled, bonded to the radius. The plates are manufactured from three layers of materials; 3/32” PTFE, 25% glass filled, 1/2” thick fabric belting material and carbon steel.
Live New Webinar
Sign-up for a Live Technical Webinar…
Constant Spring Supports Design and Application Webinar
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are 1 PE/PDH Credit for TX Professional Engineers
This Webinar will focus on the different types of constant spring supports. Learn about the special features available, in addition to the design of a constant support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace a constant spring support, as well as shutdown and isolation procedures.
February 9th: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits