PT&P designed cold insulated pipe saddles with PTFE slide plates to provide sliding and guiding support for horizontal piping leading to an ethane cracker at a plant in Texas. The project fulfilled an emergency request when the client realized the product was missing at time of installation. The pipe saddles are fabricated from carbon steel with a hot-dipped galvanized finish for pipe sizes ranging from 3″ to 56″. They have a diameter of 40″, height of 23-5/8″, width of 42-1/2″ and 11-7/8″ BOP. Visual inspection and dimensional checks using a section of pipe were completed prior to shipment.
Live New Webinar
Sign-up for a Live Technical Webinar…
Pipe Support Field Inspection, Installation and Maintenance Webinar
Date: Thursday, December 2, 2021 – Register for 10:00 am or 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
This Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real-world problems and see how we were able to solve them with timely and cost-effective solutions.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits