Variable Spring Supports Designed for a Large Refinery Project in Texas

April 20, 2021

Variable Spring Supports Designed for a Large Refinery Project in Texas

PT&P manufactured 266 variable spring supports for a refinery in Texas. The variable spring hangers include chained travel stops for ease of disengagement and reinsertion during plant shutdowns. Variable springs (a type of Compression spring) are used in a wide range of applications (including various Low Carbon Capital projects, CO2 removal units, and Infrastructure improvements) to support the piping system. The variables are fabricated from carbon steel and hot-dipped galvanized to protect against corrosion. The PTP-2 variables were designed for loads up to 13,850 lb. and movements up to 0.1875” upwards. The PTP-4 variables were designed for a maximum load of 15,050 lb. and movements up to 0.8125” upwards. Each spring hanger underwent standard load testing and QC tests. PT&P also provided constant supports for loads that remain uniform throughout the deflection cycle and sway struts for controlling vibration and shock loading while restraining movement due to thermal expansion for this order.

Read More

Variable Supports Fabricated in 48 hours for an Emergency Plant Shutdown

April 13, 2021

Variable Spring Supports Fabricated in less than 48 hours for an Emergency Plant Shutdown Overseas in the Asia-Pacific Region

PT&P received a rush order this past week for variable spring supports at 4:41 pm, quite late into the workday; however, this is business as usual, our manufacturing facility in Houston, TX operates 24/7 to support our customers.

In this case, the customer facility, an olefins plant was incurring a significant loss and needed to replace the springs to resume operations as quickly as possible. The seven (7) variable springs were designed, fabricated, and shipped within 2 days. The F-type variable spring support is designed to support piping from below, directly from the foundation, concrete column, or supporting structural pipe rack steel. Adjustment is made by inserting a bar into holes in the load column and turning the load column as a jackscrew. The base plate is bolted to the case and has four holes for fastening.

As global leaders in variable spring manufacturing, we used our adaptive manufacturing processes in which the PT&P pre-fabricated component parts that make up these variables are easily assembled when orders are placed. These variables were fabricated from carbon steel and hot-dipped galvanized for corrosion protection. They are designed to support loads ranging from 713 lb. to 1668 lb. and movements of 0.148” to 0.133”. Load and travel tests, along with Q.C. inspections were performed before shipment. Variable springs are used in mills, refineries, chemical, plastics, polymer, solar, power, biochar, renewables, carbon black, LNG boilers, food, packaging, and wastewater treatment plants to support piping as it goes through its’ range of movement.

Variable rush job 183959b Variable rush job 183959c

Read More
Top