PT&P designed and manufactured these variable spring hanger assemblies for an upstream and valve project in Thailand. The variables clamp sizes range from 6″ to 12″ diameter with installed heights ranging from 6-8/8″ to 12-1/4″ from the structure to the center of the pipe. The B-Type pipe hanger assembly uses coil springs to support the load and allow for some movement. They are furnished with one lug welded to the top of the spring casing which allows the assembly to be suspended from structural members for pipe support. All forty-seven variable spring supports were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assemblies at the prescribed installed load.
Live New Webinar
Sign-up for a Live Technical Webinar…
Pipe Support Field Inspection, Installation and Maintenance Webinar
Date: Thursday, December 2, 2021 – Register for 10:00 am or 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
This Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real-world problems and see how we were able to solve them with timely and cost-effective solutions.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits