Piping Technology & Products, Inc. designed and manufactured variable spring supports for a refinery in Forney, Texas.
The spring supports are made of carbon steel and have a length by casing diameter range from 9-3/16 by 8-5/8 to 53-11/16 by 12 ¾. In order to insure the quality of the springs, compression tests were used with a load capacity of 21,500 pounds.
Need supports like these? Let us help serve your needs!
Sweco Fab, Inc. designed and manufactured pig launchers and receivers for an oil and gas exploration and production company in Venezuela.
The launchers and receivers are designed with a 6 line and 8 barrel at 60 long with a 4 kicker, ¾ in. P.I., 2 vent and drain design per ASME B31.4. They are made to withstand 1480 PSIG at 100ºF and can accommodate 15 pigs. They were painted inside and out per System 6E grey color and included simple skid, MTR, N.D.E., and flange protectors.
Learn about these products and more from our webinar archives!
Piping Technology & Products, Inc. designed and manufactured PTFE, 25% glass filled, slide plates for a chemical plant in Port Arthur, Texas.
These slide plates are constructed of PTFE, 25% glass filled, bonded to stainless steel backing plates. The top plates range from 123 ¾ square inches to 481 ¾ square inches and the bottom plates range from 69 square inches to 616 square inches.
Want to find out more information about slide plates? Visit our webinar archives today!
Piping Technology & Products, Inc. designed and manufactured saddles for a power project in California.
The saddles were built for 12″, 24″ and 30″ pipe and the loads varied from 1,500 pounds to a maximum design load of 20,000 pounds. The saddle and its components will hang from a beam in the field by spring hangers to complete what is known as a “trapeze” pipe hanger assembly. In order to prevent movement, the supported pipes will be secured to the curved portion of the saddle with u-bolts.
If you are in need of pipe saddles, let us know! We would be glad to help you.
