The stands were completed with a hot-dipped galvanize finish. They were also designed with a neoprene lining in the saddle to prevent metal to metal contact in the field. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline. The simplicity of the design allows for easy installation and maintenance of the support.
Do you see a need for adjustable pipe stands in your current or upcoming project? Get pricing today!
PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.
Do you require base insulated supports for project? Let us price them for you today!
These beam clamp assemblies are fabricated from carbon steel with a hot-dipped galvanized finish. The clamp is designed to support a pipe that is 10″ in diameter and is capable of loads up to 3,600 lb. The rod measures 7/8″ in diameter.
The function of the beam clamp assembly is to support the pipe and allow it to swing. The clamp requires no welding which allows for a quick and easy installation.
Do you require beam clamp assemblies in your project? Get pricing today!
PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.
View Benefits of ISO 9001:2000
View ISO 9001:2000 Certificate
The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.
Read More
– U-Type constant spring supports for a power plant in Thailand
– Fabricated from A36 carbon steel
– Dimensions = 25″W x 28″H x 80″L
– Load = 24,000 lb.
– 3″ of total travel upward
– Standard load and travel testing was performed
Want to learn more about constant springs? Instantly view a constant webinar today.
26″ Hot Water Expansion Tank
– Material: .25″ Thick Carbon Steel
– Design Pressure: 50 PSIG
– Design Temperature: 200 F
– Capacity: 170 Gallons
Do you require a vessel or tank for your current or upcoming job? Get pricing today!
This sway strut is fabricated from carbon steel and measures 240″ from pin to pin. The pipe is 6″ in diameter and has a load capability of 15,000 lbs. The components were completed with a hot-dipped galvanize finish and the pipe was coated with a shop primer. The function of a sway strut is to restrain movement of piping in one direction while providing for movement due to thermal expansion or contraction in another direction.
This particular sway strut will support a 30″ process line in a refinery. This type of support is necessary, because the current line has only a few I-beams for support. Additionally, the I-beams that support the line are very high off the ground and not capable of handling the large forces acting on the line. Due to the loads acting upon the pipe and length of the required strut, a heavy schedule pipe and heavier duty strut ends were necessary.
Do you require sway struts in your plant or refinery? Get pricing today!
These pipe shoes are fabricated from A-516 GR70 carbon steel. PTFE, 25% glass filled, material is bonded to a carbon steel plate, then welded onto the shoe to allow movement of the pipe during expansion and contraction. The pipe shoes range in size from 18″ to 28″ in width and 28″ to 43″ in length.
Want to learn more about pipe shoes? Instantly view a webinar today!
The design of this constant requires that it be connected by pins from the top and from the bottom to allow it to angulate. The constant assemblies are fabricated from A36 carbon steel. The constants measure between 23″ and 43″ in length with a take-off between 29″ and 55″. The load range is 60 lb. to 2,605 lb. and each constant assembly underwent standard load and travel testing.
Do you see a need for constants in your plant or refinery? Get pricing today!
Components of these Cylinder Pipe Guides (a.k.a. Spider Guides) include carbon steel plates, stock clamps, angles, and hot-dipped galvanized pipes. The Guides range in pipe size from 6″ to 16″. The maximum design temperature for the Spider Guides is 750ºF.
They are designed to control lateral pipe movement and maintain the alignment of the piping through its axial and contraction cycles. A single piping run uses multiple Spider Guides to avoid a fulcrum or an imposed lateral deflection on critical components.
Want to learn more about spider guides? Instantly view a webinar on spider guides!
