Structural Supports Coated with Red Oxide Primer for a Power Plant

September 1, 2010

Structural Supports Coated With Red Oxide Primer For A Power Plant

The structural pipe supports are fabricated from carbon steel and coated with red oxide primer. The structural steel will be stored in a warehouse for several months while the power plant is being built. Due to the plant’s location along the United States East Coast, the use of the red oxide primer was selected. Also, modifications were made to our standard “insulation saddles” to allow for a higher load capacity; which can be seen in the foreground of the image above.

Do you require replacement or additional structural supports in your plant? Get a quote today! Request-A-Quote

Read More

PT&P Celebrates its Diversity

August 30, 2010

Piping Technology is proud to employ employees from a wide variety of countries, cultures and backgrounds. Check out a recent mosaic we created to showcase our employees and products:

Zumyn Personalised Photo Mosaics Mosaicdetails 8312010 93049 Am

Read More

U.S. Bellows (a division of PT&P) Exhibits at the 2010 NPRA Cat Cracker Seminar

August 25, 2010


Sales Associate With Vp Rakesh Agrawal

The U.S. Bellows exhibit featured a cut-away view of an expansion joint with insulating and abrasion resistant refractory lining and miniature models of various types of metallic expansion joints. Discussions at the booth included how to solve regenerated catalyst and spent catalyst standpipe expansion joint reliability problems. Talk to the engineers at U.S. Bellows about your flue gas expansion joint problems. We can help with your fabric expansion joint problems in low pressure flue gas systems.

Read More

48" Diameter High Pressure Knock-out Drum for a Chemical Company

48&Quot; Diameter High Pressure Knock-Out Drum For A Chemical Company

This high pressure knock-out drum has a 2.5″ thick shell fabricated from ASTM SA516 Grade 70, and a SA105 and SA350 carbon steel flange. The drum has a 48″ diameter, a total length of 15’8″ and weighs over 23,000 lb. It underwent a hydro-test and design test per ASME section VIII-1 “U” stamp vessel prior to shipment.

Do you require a vessel or knock-out drum for your project? Get pricing today!

Read More

PT&P Helps Start the School Year off Right

August 21, 2010

We are grateful for the opportunity to help out the local community by donating school supplies to children of various ages. We supplied an assortment of items including notebook paper, pencils, pens, glue sticks and construction paper.  At the event today, children were all smiles as they picked up their new backpack and school supplies. They also were able to pick up some donated clothing and shoes and top it all off with a hot dog, nachos and cold drink!

Three Girls With Their New School Supplies From Pt&Amp;P
Three Girls with their New School Supplies from PT&P

See other opportunities we have had to serve the community in the past!
PT&P and the Community

Read More

Piping Technology Hosts Houston Caesar II Meeting

August 7, 2010

This week, Piping Technology hosted a meeting at a local Indian restaurant in Houston for the Houston Caesar II User Group and SPED members.  While attendees enjoyed a delectable Indian meal, we presented a technical overview on pipe support engineering and design featuring a variety of products including variable springs, pipe clamps, and pre-insulated supports. The presentation also featured various design tools including finite element analysis, 3D modeling, and STAAD analysis.

Read More

August 2010 News

August 5, 2010

PT&P Releases a New 2010 Pipe Supports Catalog to Celebrate 35th Anniversary
Pt&Amp;P Pipe Support CatalogA number of improvements have been implemented based on valuable feedback from our customers and engineers. We expanded the product selection and improved the drawings and data tables. Detailed ordering instructions are included for each figure, along with four types of indexes to help you select the items you need.

Bd21298 Request your copy

We also made improvements to our online version located at:

Read More

Cold Shoe Anchors with Micarta Insulation for a LNG Plant

August 3, 2010

Cold Shoe Anchors With Micarta Insulation For A Lng Plant

The cold shoes are fabricated from a combination of carbon steel, micarta insulation, and stainless steel. They measure 18″ x 12″ x 10″ and are designed for 7″ of lateral movement with temperatures as low as -162°C. A total of 16 supports were manufactured and PMI tested. This was a rush order completed in just under 12 weeks for a LNG plant.

Want to learn more about pre-insulated supports? Instantly view a pre-insulated support webinar! Access-Our-Webinar-Archives

Read More

Insulated Trunnions for a LNG Plant

July 27, 2010

Insulated Trunnions For A Lng Plant

Piping Technology & Products, Inc. manufactured 29 insulated trunnions ranging in NPS from 1.5″ to 10″ with the larger trunnion measuring 54″ in height. The trunnions were fabricated from 304 stainless steel with Micarta insulation. They will be used in an LNG plant as insulated pipeline elbows.

Do you see a need for insulated trunnions in your plant? Get pricing today!

Read More

Custom Chrome-Moly Three-Bolt Pipe Clamps for a Power Plant

July 20, 2010

Custom Chrome-Moly Three-Bolt Pipe Clamps For A Power Plant

The pipe clamps are manufactured from 2″ thick by 10″ wide Chrome-Moly (A387 Gr. 22) bar stock and alloy (A 193 Gr. B7) bolting of 2-3/4″ diameter throughout. They are designed for an operating temperature of 1065°F with a maximum design load rating of 35,000 lb. The pipe clamps will be used to support 24″ diameter pipe in a power plant.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!


Read More