List | Piping Technology & Products, Inc.

68,000 lb. Load Custom Clamp

September 10, 2008

This custom pipe clamp will be used in conjunction with a hydraulic snubber to restrain pipe movement during extremely high disturbances. It is designed to support the pipe where two heavy duty flanges join. The yoke, lugs, and strap sections of the clamp are carbon steel, and the clamp bolts and load bolt/pin are stainless steel.

The outer diameter of the clamp section is 16″, and the inner diameter is 10″. The upper lugs are fabricated from 3/4″ thick plate with a 2-1/4″ diameter load bolt. The maximum load for this custom clamp is 68,000 lb.

Do you require custom pipe clamps in your piping system? Get pricing today!

A-Type Variable Spring Supports with a Load Capacity of 596 lb.

August 29, 2008

Fabricated from A-36 carbon steel, these PTP-4 A-Type variable spring supports measure 6 5/8″ OD x 19 9/16″ in length with an installed load of 596 lb. They have a spring rate of 56 lb/in., and a downward travel of 1.375″. These supports are designed to suspend from a rod that is threaded through the upper portion of the variable (see Fig. PTP-4). This particular design is generally used to keep the variable further away from the beam to avoid interference.

Want to learn more about variable springs? Instantly view a past variables webinar!

Stainless Steel Trunnions for an LNG Plant

August 13, 2008

These stainless steel trunnions are designed to support a vertical pipe used in an LNG plant. The trunnions will support stainless steel pipes with diameters ranging between 24″ and 42″. The diameter of the trunnions ranges in size from 12″ to 22″. The overall length is 34″. All of the weld seams were 100% dye-penetrant tested before being shipped to the plant.

Do you see a need for trunnions in your current or upcoming project? Get pricing!

200-C Type Constants for a Steam Plant

July 29, 2008

These 200-C type constants are fabricated from A-36 carbon steel and are designed for a load ranging between 17,800 lb. and 25,600 lb. The constants have a downward travel ranging between 12 1/2″ and 16″. This support maintains a constant load throughout the designed travel. The diameter of the spring coil housing is 21″. The design includes a universal locking device capable of locking the hanger rod at any desired position. It also includes lifting lugs that aid in installing the constant in the field. Standard load and travel testing was performed before shipping to a steam plant.

Do you require constant supports in your piping system? Get a price quote today!

July 2008 News

July 17, 2008

We are now hosting Webinars regarding products and services by Piping Technology & Products, Inc. and our wholly owned subsidiaries:

U.S. Bellows, Inc.
Sweco Fab, Inc.
Pipe Shields, Inc.
Anchor Darling, Ent.

Collectively we offer: Expansion Joints, Variable Spring Hangers, Constant Supports, Big Tons, Snubbers, Sway Braces, Sway Struts, Pipe Hanger Hardware, Clamps, Rods, Slide Bearing Plates, Misc. Steel Fabrication, ASME Code Pressure Vessels, Fabricated Pipe Shoes, Guides, Anchors, Instrument Supports, Pipeline “Pigs”, Launchers/Receivers, Insulated Shoes/Supports-Hot/Cold, Hold-down Clamps, “High Temp” Furnace Bags, Anchor Bolts/Embeds, Bellmouth Reducers, Inspection, Analysis, or Training Services, Field Service and Stress Analysis/Product Testing.

Pig Launchers/Receivers for a Petroleum Pipeline

July 2, 2008

The three pig launchers measure 127″, 172″, and 189″ in length and are designed for 263 PSIG at 185ºF. The pipe diameters of each unit measure 10″, 18″, and 20″, respectively. Two of the pig launchers/receivers are fabricated from carbon steel and one from stainless steel. All of the launchers/receivers were hydro-tested to ensure product quality.

Do you see a need for pig launchers in your piping system? Get pricing today!

Refractory Lined Pre-Insulated Supports

June 18, 2008

Piping Technology & Products, Inc. designed and fabricated rotational anchor pre-insulated pipe supports for a fluid processing plant in Kuwait. The supports range in size from 24″ to 34″ in diameter and are capable of withstanding 12,500 lb. of vertical load. The bottom of the hot shoe is fabricated from carbon steel and the top from stainless steel.

These supports include stainless steel inner thrust plates that function as an anchor to prohibit the pipe from rotating within the shoe. These supports are designed for steam super heater lines and provide thermal insulation for the pipe in order to prevent heat loss and condensation.

Want to learn more about pre-insulated supports? Instantly watch a pre-insulated support webinar!

48" Carbon Steel Pressure Vessel

June 5, 2008

48&Quot; Carbon Steel Pressure Vessel — 48" Carbon Steel Pressure Vessel

Pressure Vessel
– Diameter: 48″ O.D.
– Capacity: 1,100 Gallons
– Material Fabricated From: Carbon Steel
– Design Temperature & Pressure: 285 PSIG at 100ºF
– Testing: Hydro-Tested and held for 1/2 hour at 428 PSIG

Do you have a need for a pressure vessel? Get pricing on a vessel today!

8 Foot Long Big Ton Variable Spring Assembly

May 28, 2008

This big ton spring assembly is designed for a local area refinery, and is fabricated from carbon steel components with a painted finish. The top of the load flange has three PTFE, 25% glass filled slide plates. The base is 96″ x 18″ and the installed height is 24″. This big ton spring will be utilized to support heavy (in excess of 76,000 lb.) loads where a standard variable spring would be undersized. The big ton spring design includes an array of parallel coils within one frame to produce large load carrying capacity while maintaining the same spring rate. The assembly is designed to withstand an operating load of 76,800 lb. and has a downward travel of 0.894″.

Prior to fabrication, each of the coils were individually tested to insure correct spring rate and load capacity. After fabrication, the entire assembly was tested throughout the entire load and travel range.

Want to learn more about big ton springs? View an engineered spring support webinar today!

7 Foot Long Pressure Vessel for a Chemical Plant

May 14, 2008

This pressure vessel measures 84″ in length and is fabricated entirely of SA516-70 carbon steel. It is designed for low temperature environments and has a design pressure of 117 PSIG at 500ºF. A hydrostatic test was completed at 205 PSIG prior to shipment.

Do you have a requirement for a pressure vessel in your plant? Get pricing today!

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Our Subsidiaries

Blog