List | Piping Technology & Products, Inc.

Constants that Support up to 38,800 lbs.

December 17, 2004

Piping Technology & Products, Inc. custom designed and manufactured four PTP-100 Type G constants and three PTP-100 Type C constants for a power station in Missouri. The PTP-100 Type C constants are designed for operating loads of 8,300 lbs. to 25,200 lbs. and have a travel range of 2.5 to 3.5. These constants are fabricated from A36 carbon steel with dimensions ranging from 66×18 to 88×20.

The PTP-100 Type G constants are designed for operating loads ranging from 2,800 lbs. to 38,800 lb. and a travel range of 2.5 to 3.5. They are fabricated out of A36 carbon steel with dimensions ranging from 75×26.5 to 95×50. Standard load and adjustment testing was performed to ensure quality prior to shipping.

Do you require constant spring supports in your piping system? Get pricing now!

Transition Piece for Olefin Site at Chocolate Bayou

December 10, 2004

Sweco Fab, Inc. recently designed and manufactured a 1,900 lb. transition piece for an olefin site at Chocolate Bayou on the Texas Gulf Coast. The product transitions from round to oval and is made of 36″ half pipe construction. The piece measures 36″ x 72″ x 60″ and is constructed of carbon steel. The transition piece will be used to regulate the flow of both air and liquid. Prior to shipping the product was hydrotested to guarantee quality.

Do you require a transition piece in your piping system? Get pricing now!

46 Constants for Hydrogen Reformer

November 26, 2004

Piping Technology & Products, Inc. custom designed and manufactured 46 PTP 100-C size 50 constants for a hydrogen reformer in Chile. The constants measure 30 x 48, designed for a vertical travel range of 11 and an operating load capacity of 2,600 lbs. They are fabricated out of A36 carbon steel. To ensure quality, standard load and travel tests were performed prior to shipping.

Want to learn more about constants? Instantly view a constant webinar now!

Adjustable Base Supports and Flanged Trunnions for Cold Piping

November 19, 2004

Piping Technology & Products Inc., recently designed and fabricated 87 base supports and flanged trunnions for cold piping to be used in Equatorial Guinea. The products were designed according to customer specifications and the pipes range in size from 3″ to 24″. The base supports and trunnions were fabricated from micarta and A36 carbon steel.

Do you require adjustable base supports like those described above? Get pricing today!

Structural Frame Posts for Power Plant

November 5, 2004

Piping Technology & Products, Inc. recently custom designed and fabricated an 11′ x 11′ x 11′ six structural frame for a power plant in California.

Each post of the frame measures 11’x11’x11′ with knee braces 15′ long at 45º to the vertical post. The structure is made of carbon steel and includes W6X15 beams. The frame supports 24′ auxiliary cooling water lines and can sustain vertical operating loads of up to 13,500 lbs. This structure is also designed to withstand a seismic loading factor of .49 in all directions.

Do you see a need for structural frame posts in your plant? Get pricing today!

70,000 lb. Load Constants for Power Plant

October 29, 2004

These constants are designed for a vertical travel range of 8.5 and an operating load capacity of 70,000 lbs. They are fabricated out of A36 carbon steel with dimensions of 45×80. Prior to shipping, standard load and travel tests were performed to ensure product quality.

Do you require constant springs in your piping system? Let us price them for you now!

17,000 lb. Load Horizontal Travelers for Hydrogen Reformer

October 22, 2004

Piping Technology & Products, Inc. custom designed and manufactured four PTP-2 type G horizontal travelers to be used at a hydrogen reformer in Chile. The travelers are designed for a horizontal travel range of 12″ and an operating load capacity of 1400 lbs. and 17,000 lbs. They are fabricated out of A36 carbon steel with dimensions of 3 1/2″ x 6″x 16″ and 6″ x 10″x 18″. These horizontal travelers will maintain hanger rods in vertical position at the hydrogen reformer. Load testing was performed to ensure product quality prior to shipping.

Do you see a need for horizontal travelers in your piping system? Get pricing now!

Custom Variable Springs for Power Plant

October 8, 2004

Piping Technology and Products, Inc. custom designed and manufactured variable springs to be used in conjunction with a rod and clevis assembly for a power plant in West Virginia. Since the operating loads specified by the customer were greater than the maximum loads for the largest PT&P spring, custom units needed to be built for this application. The springs were fabricated using a large spring coil, normally only used in constant spring assemblies. The spring is 20 1/2″ in diameter and has a standing height of 51″. All components of the pipe hanger assembly were made from carbon steel and were supplied with a hot-dipped galvanized finish. The spring is 20 1/2″ in diameter and has a standing height of 51″. The rods will be attached to type A variable springs designed to support loads from 850 lbs. to 13,300 lbs. Manufactured from A-36 carbon steel, the rods are 3/4″ to 2″ in diameter and range in length from 68″ to 95″.

To prevent contamination at high temperatures, a non-galvanized finish was applied to the rods per customer’s request. Prior to delivery, a 100% dye-penetrant test was preformed to ensure quality. The variable springs were tested in the load cell to insure proper operation and also to set the cold load to the specifications as provided by the customer.

Want to learn more about variable springs? Instantly view a past variable webinar!

Bronzphite® Slide Plates for an Oil Refinery in Texas

October 1, 2004

The Bronzphite® slide plates shown above are constructed from graphite and phosphorus bronze with dimensions ranging from 3″ x 3″ to 6″ x 36″. They are designed for up to 500ºF and a total travel of up to 30″.

In general, Bronzphite® is a self-lubricating bearing plate made of a high quality bronze with graphite filled grooves. The solid graphite inserts are arranged in various patterns and sizes to meet customer specifications. This type of slide plate is best suited for high loads, low velocity applications and in places where the use of oil or grease in undesirable or unfeasible.

Want to learn more about slide plates? View a past slide plate webinar now!

Constants for an Oil Refinery in Texas

September 17, 2004

Piping Technology & Products, Inc. recently fabricated 48 PTP-200 type U and 54 PTP-100 type B constants for an oil refinery in Texas. The PTP 200 type U with base support constants are designed for operating loads ranging from 650 lbs. to 7700 lbs. and a travel range of 3″ to 4″. They are fabricated out of A36 carbon steel with dimensions ranging from 15″x22″ to 27″x38″. The PTP 100 type B constants are fabricated from A36 carbon steel with dimensions ranging from 11.5″x23″ to 12″x29″ and total travel of 3″ to 4″. These constants are designed for operation loads ranging from 1100 lbs. to 2800 lbs. Space restrictions required a customized compact design. Standard load testing was performed to ensure product quality prior to shipping.

Do you require constant supports for your piping system? Let us price them for you today!

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Our Subsidiaries

Blog