Blog

Pig Receiver with Saddle Supports
June 4, 2004

Pig Receiver With Saddle Supports
Pig Receiver with Saddle Supports

Sweco Fab, Inc. recently fabricated a Pig Receiver Class 600 with saddle supports for an industrial company in Texas.  The pig receiver is composed of a 24 dia. minor barrel and a 30 dia. major barrel with 1 thick walls. It is approximately 250 in length and weighs 8,200 lb. The major and minor barrels are fabricated from API-5L Gr.B, X42 and SA106B material, respectively. All other items are fabricated from SA105, SA106B, and SA-36 as applicable. The receiver is designed per ASME B31.8 with a 0.72 Design Factor and NACE MP-01-75. The design pressure is 1480 PSIG at 125°F.

Do you see a need for a pig launcher or receiver in your piping system? Get pricing now!
Request-A-Quote


Read More

Thirty PT&P Fig. 70A Clamps for a Power Plant
May 28, 2004
Thirty Pt&Amp;P Fig. 70A Clamps For A Power Plant
Thirty PT&P Fig. 70A Clamps for a Power Plant

Piping Technology and Products, Inc. recently designed and fabricated thirty PT&P Fig. 70A clamps to fit 14″ to 18″ pipes at a power plant in Florida. These clamps are designed for suspension of hot pipe lines where there is a high temperature and great thermal movement. The clamps are fabricated from SA 387 Gr. 22 alloy steel for temperatures of 1065F and loads of 8,000 lb. to 25,000 lb. These 160 to 395 lb. clamps have dimensions checked and a fit up test preformed prior to shipping.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!


Access-Our-Webinar-Archives



Read More

44,000 lb. load Horizontal Upthrust Constant
May 21, 2004

44,000 Lb. Load Horizontal Upthrust Constant
44,000 lb. load Horizontal Upthrust Constant

Piping Technology & Products, Inc. recently fabricated horizontal upthrust constants for loads ranging from 24,000 lb. to 44,000 lb.  These Fig. PTP 200 type U constants are designed for a travel range of 4″ to 4 ½”. They are fabricated from A36 carbon steel with dimensions ranging from 60″x52″ to 80″x52″. To meet customer specified installation heights, angles were added to the base of each constant. Load testing was performed to ensure product quality prior to shipping.

Want to learn more about constant springs? View a past constant webinar today!


Access-Our-Webinar-Archives



Read More

Riser Clamp Assemblies with Neoprene Lining
May 7, 2004
Riser Clamp Assemblies With Neoprene Lining
Riser Clamp Assemblies with Neoprene Lining

Piping Technology and Products, Inc. custom designed eight sets of riser clamp assemblies for an oil rig in the Gulf of Mexico. These riser clamp assemblies were fabricated from API 2H GR. 50 carbon steel. They were designed to support vertical pipe lines on an offshore platform. Each set equipped with a neoprene lining consists of two clamps and a clamp stand. Several coats of marine paint finish were applied to the assemblies to prevent corrosion due to high salt water content and open air exposure.

Do you require riser clamps in your piping system? Get pricing today!

Request-A-Quote


Read More

240 Welded Eye Rods for an Ammonia Plant
April 30, 2004
240 Welded Eye Rods For An Ammonia Plant
240 Welded Eye Rods for an Ammonia Plant

Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4 to 2 in diameter and range in length from 68 to 95. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer’s request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.

Do you have a requirement for welded eye rods in your current job? Get pricing now!
Request-A-Quote


Read More

Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery
April 16, 2004
Two 16 Dia. Hd-2 Hold Down Clamps For An Oil Refinery
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan.  These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!
Request-A-Quote


Read More

90,000 lb. Load Big Ton Springs for a Chemical Plant
April 9, 2004

90,000 Lb. Load Big Ton Springs For A Chemical Plant
90,000 lb. Load Big Ton Springs for a Chemical Plant
90,000 Lb. Load Big Ton Springs For A Chemical Plant
Name Plate Indicates Hot/Cold Loads

Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.

Do you require big ton springs in your current or future job? Get pricing today!
Request-A-Quote

Read More

April 2004 News
April 4, 2004

Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to info@pipingtech.com or 1+713-731-8640 (fax) for an immediate quote.

PHDS Software

Software Features

  • Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
  • Use a built-in function to submit drawing data to PT&P for quotation
Read More

13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate
April 2, 2004
13,900 Lb. Load Pipe Shoes And Bronzphite® Slide Plate
13,900 lb. Load Pipe Shoes and Bronzphite® Slide Plate

Piping Technology and Products, Inc. recently designed and fabricated more than 75 pipe shoe and Bronzphite® slide plate assemblies for an oil refinery in Texas. Each assembly consists of two pipe clamps, a base plate and a maintenance free Bronzphite® slide plate. The pipe shoes with sizes ranging from 18 to 24 are fabricated from A387 alloy steel. They are designed for 965°F and 2 of horizontal movement.

The 3 x 3 Bronzphite® (graphite impregnated bronze) slide plates are self-lubricating bearing plates made of a high quality bronze with graphite filled grooves. They are designed for heavy loads, low velocity applications, and for situations where the use of oil or grease is undesirable or unfeasible.

Do you require pipe shoes or slide plates in your piping system? Let us price them for you today!
Request-A-Quote

Read More

950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig
March 19, 2004
950 Lb. Load Ptp- 6 Type F Variable Springs For An Offshore Oil Rig
950 lb. Load PTP- 6 Type F Variable Springs for an Offshore Oil Rig

Piping Technology and Products, Inc. recently designed and fabricated two 950 lb. load PTP-6 type F size 90 variable springs for an offshore oil rig.  These variable springs have an overall height of 33 1/2″ and are designed for a travel range of 4″. Each variable consists of an 8 5/8″ dia. casing, a 13″ square base plate, an 8″ load flange and three spring coils with a 7 1/2″ working range. All components are fabricated from carbon steel and are hot-dipped galvanized.

Want to learn more about variable springs? Instantly view a past variable webinar!


Access-Our-Webinar-Archives



Read More
Top